Basic Operations; Controlling Your System At The Analog Ports; Viewing And Selecting Ports And Servers; Accessing The Main Dialog Box - Fujitsu KVM s2-1602 Bedienungsanleitung

4

Basic Operations

4.1

Controlling Your System at the Analog Ports

The KVM s2-1602 features two analog port sets (KVM s2-0801 features only one
analog port set) on the back of the unit that allow you to connect a monitor and a
PS/2 keyboard and mouse for direct analog access. The appliance uses OSCAR,
the On-Screen Configuration and Activity Reporting interface, which utilizes intuitive
menus to configure your system and select computers.
4.2

Viewing and Selecting Ports and Servers

Use the OSCAR Main dialog box to view, configure and control servers in the KVM
s2-1602/0801 system. View your servers by name, port or by the unique Electronic
ID number (EID) embedded in each KVM s2-Adapter. You will see an OSCAR-
generated port list by default when you first launch OSCAR.
The Port column indicates the RI port to which a server is connected. If you connect
a legacy KVM switch to the appliance, the port numbering displays the RI port first,
then the switch port to which the server is connected. For example, in Figure 5, serv-
ers 06-01, 06-02, 06-03, 06-04 and 01-02 are connected to cascaded switches.

4.2.1 Accessing the Main dialog box

Press Print Screen to launch OSCAR. The Main dialog box appears.
Figure 5: Example of Configured Main Dialog Box
You can also press the Control key twice within one second to launch
OSCAR. You can use this key sequence in any place you see Print Screen
throughout this installer/user guide.
590-334-609F 13