Turning Broadcasting Off; Changing Your Switch Mode - Fujitsu KVM s2-1602 Bedienungsanleitung

Basic Operations
Click Commands. The Commands dialog box appears.
Click the Broadcast Enable checkbox to activate broadcasting. The Broadcast
Enable Confirm/Deny dialog box appears.
Figure 21: Broadcast Enable Confirm/Deny Dialog Box
Click OK to enable the broadcast. Click X or press Escape to cancel and
return to the Commands dialog box.
If broadcasting is enabled, type the information and/or perform the mouse
movements you want to broadcast from the user station. Only servers in the
list are accessible.
The other user is disabled when broadcast mode is enabled.

4.7.1.2 Turning broadcasting off

From the Commands dialog box, clear the Broadcast Enable checkbox.
4.8

Changing Your Switch Mode

Your KVM s2-1602/0801 allows you to connect to attached servers using two
methods: Preemptive and Cooperative.
Select Preemptive (default setting) to allow any user to select any server at any time; a
request from another user disconnects the current user without warning.
-or-
Select Cooperative to maintain the current user connection; the current user won't
be disconnected if another user requests connection.
590-334-609F
Turning broadcasting off
31