Assigning Names To Servers; Assigning Device Types; Accessing The Devices Dialog Box - Fujitsu KVM s2-1602 Bedienungsanleitung

Basic Operations
Figure 8: Name Modify Dialog Box
Type a name in the New Name box. Names of servers may be up to 15 charac-
ters long. Legal characters include: A-Z, a-z, Ø-9, space and hyphen.
Click OK to transfer the new name to the Names dialog box. Your selection is
not saved until you click OK in the Names dialog box.
Repeat steps 1 to 3 for each server in the system.
Click OK in the Names dialog box to save your changes.
-or-
Click X or press Escape to exit the dialog box without saving changes.
If a KVM s2-Adapter has not been assigned a name, the EID is used as
the default name.

4.4.3 Assigning device types

While the appliance automatically discovers cascade KVM switches attached
to your unit, you will need to specify the number of ports on the cascade switch
through the Devices dialog box. Select the switch from the list and the Modify
button appears, allowing you to assign it the appropriate number of ports.
The Modify button will only be available if a configurable switch
is selected.

4.4.3.1 Accessing the Devices dialog box

Press Print Screen. The Main dialog box will appear.
Click Setup - Devices. The Devices dialog box appears.
590-334-609F

Assigning names to servers

19