Determining How The Status Flag Is Displayed; Setting Console Security; Accessing The Security Dialog Box - Fujitsu KVM s2-1602 Bedienungsanleitung

Basic Operations

4.4.5.2 Determining how the status flag is displayed

Select Name or EID to determine what information will be displayed.
Select Displayed to show the flag all the time or select Timed to display the
flag for only five seconds after switching.
Select a flag color in Display Color.
In Display mode, select Opaque for a solid color flag or select Transparent to
see the desktop through the flag.
To position the status flag on the desktop:
a. Click Set Position to gain access to the Set Position Flag screen.
b. Left-click on the title bar and drag to the desired location.
c. Right-click to return to the Flag dialog box.
Figure 13: Set Position Flag
Changes made to the flag position are not saved until you click OK in the
Flag dialog box.
Click OK to save settings.
-or-
Click X to exit without saving changes.

4.4.6 Setting console security

OSCAR enables you to set security on your analog port console. You can estab-
lish a screen saver mode that engages after your console remains unused for a
specified Inactivity Time. Once engaged, your console will remain locked until you
press any key or move the mouse. You will then need to type in your password to
continue.
Use the Security dialog box to lock your console with password protection, set or
change your password and enable the screen saver.
If a password has been previously set, you will have to enter the password
before you can access the Security dialog box.

4.4.6.1 Accessing the Security dialog box

Press Print Screen. The Main dialog box will appear.
Click Setup - Security. The Security dialog box appears.
590-334-609F
Determining how the status flag is displayed
23