Setting Or Changing The Password; Password Protecting Your Console - Fujitsu KVM s2-1602 Bedienungsanleitung

Setting or changing the password

Figure 14: Security Dialog Box
4.4.6.2 Setting or changing the password
Single-click and press Enter or double-click in the New text box.
Type the new password in the New text box and press Enter .
Passwords must contain both alpha and numeric characters, are case sensi-
tive and may be up to 12 characters long. Legal characters are: A-Z,
a-z, Ø-9, space and hyphen.
In the Repeat box, type the password again and press Enter .
Click OK to change only your password, and then close the dialog box.
If you should lose or forget your password, you must return your switch for
service or technical support. See the Technical Support section for contact
information.

4.4.6.3 Password protecting your console

Set your password as described in the previous procedure.
Select Enable Screen Saver.
Type the number of minutes for Inactivity Time (from 1 to 99) to delay activa-
tion of password protection and the screen saver feature.
For Mode, select Energy if your monitor is Energy Star®compliant; otherwise
select Screen.
Monitor Damage
Monitor damage can result from the use of Energy mode with monitors
not compliant with Energy Star®.
(Optional) Click Test to activate the screen saver test which lasts 10 seconds
then returns you to the Security dialog box.
Click OK.
24
Basic Operations
590-334-609F