Adding Servers To The Scan List; Removing A Server From The Scan List; Starting The Scan Mode - Fujitsu KVM s2-1602 Bedienungsanleitung

Scanning Your System

4.6.1 Adding servers to the scan list

Press Print Screen. The Main dialog box will appear.
Click Setup - Scan. The Scan dialog box appears.
Figure 18: Scan Dialog Box
In the Scan dialog box, click the checkbox next to each server that you would
like to add to the scan list.
-or-
Double-click a server name or port.
-or-
Press the Alt key and the number of the server you want to scan. You can
select up to 16 servers.
In the Scan Time box, type the number of seconds (from 3 to 99) of desired
time before the scan moves to the next server in the sequence.
Click OK.

4.6.2 Removing a server from the scan list

In the Scan dialog box, click the server to be removed.
Press Delete.
-or-
Click Clear to remove all servers from the scan list.
Click OK.

4.6.3 Starting the scan mode

Press Print Screen. The Main dialog box will appear.
Click Commands. The Commands dialog box appears.
28
Basic Operations
590-334-609F