Connecting A Kvm S2-Adapter To Each Server; Adding Legacy Switches; Adding A Legacy Kvm Switch - Fujitsu KVM s2-1602 Bedienungsanleitung

Connecting an Adapter

3.3.1 Connecting a KVM s2-Adapter to each server

Locate the KVM s2-Adapter modules for your KVM s2-1602/0801 unit.
Attach the appropriately color-coded cable ends to the keyboard, monitor and
mouse ports on the first server you will be connecting to the unit.
Attach one end of the CAT 5 cabling that will run between your KVM s2-Adapt-
er and KVM s2-1602/0801 unit to the RJ45 connector on the KVM s2-Adapter
module.
Connect the other end of the CAT 5 cable to the desired RI port on the back of
your KVM s2-1602/0801 unit.
Repeat steps 2 to 4 for all servers you wish to attach.
When connecting a Sun KVM s2-Adapter module, you must use a multi-
sync monitor to accommodate Sun computers that support both VGA and
sync-on-green or composite sync.

3.3.2 Adding legacy switches

You can add cascade switches to the KVM s2-1602/0801 system for easy integra-
tion into your existing configuration. In a cascaded system, each RI port will ac-
commodate up to 16 servers (depending on the KVM s2 model you are using).

3.3.2.1 Adding a legacy KVM switch

Mount the KVM switch into your rack cabinet. Locate a length of CAT 5
cabling to connect between your KVM s2-1602/0801 appliance and the KVM
s2-Adapter for your switch.
Attach the keyboard, monitor and mouse connectors of the KVM s2-Adapter
to a user port on your cascade switch.
Attach one end of the CAT 5 cabling to the RJ45 connector on the KVM s2-
Adapter.
Connect the other end of the CAT 5 cable to an available port on the back of
your KVM s2-1602/0801.
Connect the servers to your Fujitsu Technology Solutions cascade switch ac-
cording to the instructions included with the device.
To cascade other KVM s2 appliances to the KVM s2-1602/0801, attach
one end of a CAT 5 cable to the ACI port on the main KVM s2-1602/0801.
Attach the other end of the CAT 5 cable to an RI port on the cascaded
appliance. Note that only one level of tiering is supported in this type of
configuration and the local port OSCAR is disabled when the main KVM
s2-1602/0801 is cascaded below another appliance.
10
Installation
590-334-609F