SPORTSTECH BRT100 Bedienungsanleitung Seite 27

STEP 3
• Insert the foam roll tube(6#) into the hole as the diagram shows and then push 2X foam roll(13#) from both ends.
Secure the foam roll tube(6#) with the M6X15 Allen bolt(23#).
• Remove the lock pin (24#)and turn the Leg developer holder(5#) anti-clock wise, and fix it with the lock pin (24#)
• Push the 2X Foam roll(14#) to the ends of the Leg developer holder (5#).
1. Remove the lock knob (22#), and turn the Rear stabilizer (3)
clock wise.
2. Select the desired height with the M8X50 Lock knob (21#)
when using.
27