Replacing The Housing Seal, Connection Board, Cable Gland And Wall Bracket - Endress+Hauser Prosonic Flow 91 W Einbauanleitung

EA00040D
7.1 Reassembling the transmitter housing
Reassembly is carried out in reverse order. Note the following:
1 →
8 Replacing the housing seal, connection board, cable
gland and wall bracket
WARNING
L
The measuring device is energized!
Risk of fatal injury from electric shock.
‣
Open the measuring device only when the device is de-energized.
1 →
10
2
‣
Acid-free, non-hardening
lubricant
2 →
2.
1.
1.
3 →
Endress+Hauser