Safety Systems; Main Technical Data - Nilfisk-Advance SR 1700 2WD B Betriebsanleitung

Stability
Machine stability depends on the conditions in which it is
used.
If the machine is used within the conditions of use specified in
the manual, it is stable.
To this end, the following tests were carried out under the
same conditions on a prototype identical to the series model
and no stability problems arose. The conditions were:
Flat ground with good surface conditions:
– Transfer maximum speed: 14 km/h
– Working speed: from 1 to 8 km/h
– Bending radius (maximum speed of 14 km/h): 3 m
– Bending radius (speed of 5 km/h): 0 m.
On sloping ground with good surface conditions and
maximum longitudinal slope of 20%:
– Bending radius (maximum speed of 5 km/h): 3 m
– Bending radius (speed of 1 km/h): 0 m.
Maximum crossfall while in transfer: 15%
Maximum crossfall, at 5 km/h: 20%
The tests were carried out with lowered and empty hopper.
For different conditions of use, the machine operator should
be able to assess the limits of the machine,
and should, in any case, follow the indications laid down in the
manual.
Information on brooms
Side brooms (2, Fig. E)
– Polypropylene side broom
– Polypropylene and steel side broom
– Steel side broom
– Nylon side broom
Main brooms (13, Fig. E)
– Natural fibre and polypropylene main broom
– Polypropylene main broom
– Polypropylene and steel main broom
– Nylon main broom
Brooms with a moplen shaft or with different bristles can be
supplied on request.

SAFETY SYSTEMS

The machine is provided with:
– An operator's seat sensor that stops the machine as
soon as the operator leaves the seat;
– A safety lever on the joystick to avoid accidental wrong
operation.
33014816(1)2005-07 A

MAIN TECHNICAL DATA

General data
Sweeping system
Loading system
Sweeping range with one side broom
Sweeping range with two side brooms
Collection width
Standard hour working capability
Main broom length
Diameter
Charging motor
Broom motor
Drive motor
Suction motor
Drive type
Gradeability
Maximum drive speed
Dust filters
Filtering surface
Hopper
Capacity
Dumping type
Dumping height
Lifting type
Overall dimensions
Length
Width
Height
Weight in running conditions
Charging motor
Type
Voltage
Power
Maximum speed
USER MANUAL
Values
Mechanical suction
Front
1,300 mm
10,700 mm
10,000 mm
12,000 m
994 mm
380 mm
AMRE 48 V 7 kW
Hydraulic
Hydraulic
Electric 48 V
Hydrostatic
15%
9 km/h
Polyester multi-pocket
8.5 m²
Front
360 litres
Multilevel
1,510 mm
Hydraulic
Values
2,500 mm
1,350 mm
1,570 mm
2,130 Kg
Values
AMRE
48V
7 kW
2,000 rpm
2
7