Pari LC SPRINT SINUS Bedienungsanleitung Seite 34

6.3.5 Care of tubes
Depending on the environmental conditions, condensation may occur in the
pressure hose and the bolus tube during usage. To ensure that treatment is
carried out properly condensation must be removed after use.
To do this proceed as follows:
• Detach the pressure hose (2) and the bolus tube (6) from the nebuliser.
• Leave the pressure hose connected to the compressor.
• Leave the compressor running until any condensation in the tubing has
been removed by the air-flow.
• Detach the pressure hose from the compressor.
• Connect the bolus tube with the right end to the compressed air connection
of the compressor and proceed as described for the pressure hose above,
until any condensation has been removed here as well.
• Replace the PARI SINUS tube system (part. no. 041B4570) with every
change of patient, or if the tube looks dirty.
Please continue reading Chapter 7 "Miscellaneous".
30