Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Care; Troubleshooting - Klarstein 10030774 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Keep Surface Clean
1. Unplug unit and disconnect electricity before cleaning.
2. Apply the small amount neutral cleaning solution to a clean and soft cloth and wipe the unit, and then dry it tho-
roughly with another dry cloth. Please don't use gas oil or other abrasive cleansers and corrosive liquids to clean.
Keep Accessories Clean
1. After each use, clean the whole accessories used to avoid the accumulation of dirt.
2. If Stirring Rob are caught by barrel and doesn't come off, you could pour an appropriate amount of water to
steep for a while and then take Stirring Rod off.
3. If not use the unit for a long time, you should clean whole accessories and allow them to cool and store them
into barrel.
Environment for Use
1. Appropriate temperature for use is -10°C to 40°C.
2. Air relative humidity should be lower than 95% and temperature should be 25°C.
3. Appropriate temperature for storage is -40°C to 60°C.
4. No inflammable gas, corrosive gas or conducting dust in air.
Problem
Bread Maker fails to
mix flour and work.
Abnormal Sound.
Abnormal Smell/
Taste.

Cleaning and Care

Troubleshooting

Possible Cause
Check if plug into outlet.
Check if operation is delayed.
Damage of Parts.
There is a litter of hard stuffs or
crumbs in barrel.
Lock Barrel into position.
Wire cord damaged.
something left on heating tube.
Solution
Press "Start/Stop" and Bread Maker begins to
work.
Indicator ":" is flashing, and countdown begins
to work.
Send To Maintenance Department
Remove anything found inside the unit before
re-start.
Re-place bread barrel into position.
Keep wire cord away from heated objects.
Remove the matter left on heating tube.
30

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis