Importing And Exporting Cartridges; Opening The I/E Station; Importing And Exporting A Cartridge; Registration To The Database - Sony ODS-series Benutzerhandbuch

Importing and Exporting
Cartridges

Opening the I/E Station

Press the I/E STATION button on the front panel to release
the I/E station lock before opening the I/E station. When
you press the I/E STATION button, the lock releases and
the I/E STATION indicator blinks orange.
Notes
• Press and hold the I/E STATION button (for about one
second) and wait until the I/E STATION indicator blinks
orange before opening the I/E station.
• If the I/E station does not unlock when the I/E STATION
button is pressed, push the I/E station all the way into the
unit and then press the I/E STATION button again.

Importing and Exporting a Cartridge

Insert a cartridge into a slot, and push the cartridge all the
way in until it stops.
When removing a cartridge, pull the cartridge out to the
left while keeping it horizontal.
Closing the I/E station
Slowly push the I/E station all the way into the unit, and
check that the I/E STATION indicator blinks green.
Notes
• If the I/E STATION indicator is blinking orange, the I/E
station is not completely closed.
• A warning tone sounds if the I/E station is left open for
3 minutes or longer.
50

Importing and Exporting Cartridges

Label attachment area facing forward.

Registration to the Database

After inserting a cartridge and closing the I/E station,
information about each cartridge is automatically
registered in the unit's database. The database registration
may take some time to complete when inserting multiple
cartridges.
When registration to the database is complete, the I/E
STATION indicator will light green or orange.