Sony ODS-series Benutzerhandbuch Seite 56

Menu
1.Network
2.Control Panel
Maintenance
1.Configuration
2.Diagnostic
3.Power Management
4.Service
56
Menu Operation
Description
Configures the network settings.
Network 1 / Network 2:
Configures settings for the
ODS-L30M's two network
ports.
IPv4 Enabled / IPv6 Enabled:
Enables or disables IPv4 or
IPv6.
IPv4 DHCP / IPv6 DHCP:
Specifies whether to use the
DHCP for the IPv4 or IPv6 IP
address or whether to use a
static address.
IPv4 Address / IPv6 Address:
Configures the IPv4 or IPv6
IP address.
IPv4 Netmask: Configures the
IPv4 subnet mask.
IPv6 Subnetprefix: Configures
the IPv6 subnet prefix.
IPv4 Gateway / IPv6 Gateway:
Configures the IPv4 and IPv6
default gateway.
IPv4 DNS / IPv6 DNS: Specifies
whether to obtain the IPv4 or
IPv6 IP DNS automatically or
whether to use a static
address.
IPv4 Primary DNS / IPv6
Primary DNS: Configures the
IPv4 and IPv6 primary DNS.
IPv4 Secondary DNS / IPv6
Secondary DNS: Configures
the IPv4 and IPv6 secondary
DNS.
Configures the control panel
settings.
Buzzer: Turns the warning tone
on or off.
LCD Backlight: Specifies
whether the LCD backlight
turns off automatically or
whether it is always on.
LCD Brightness: Sets the LCD
brightness to Low, Middle, or
High.
Menu used for maintenance.
Factory Setting: Restores the
unit's configurations to their
factory default settings.
Menu for service personnel.
Reboot: Restarts the unit.
Menu for service personnel.