Ods-L60E; Front Panel - Sony ODS-series Benutzerhandbuch

g Drive unit mount slots
Allow you to install up to two optional drive units
(ODS-D77F).
h OUT 2 (unit interconnection) connector
Connect to the IN 2 connector on the extension unit
(ODS-L60E/ODS-L100E) using unit interconnection
cable 2 (supplied with the extension unit).
i DRIVE 1, 2 connectors (ODS control (ADI / power
supply))
Connect to the ODS CONTROL connector on the drive
unit with the same number (DRIVE 1 or 2) using an ODA
control cable (supplied with the drive unit) to supply
power to the drive unit and to enable ADI control.
j OUT 1 (unit interconnection) connector
Connect to the IN 1 connector on the extension unit
(ODS-L60E/ODS-L100E) using unit interconnection
cable 1 (supplied with the extension unit).

ODS-L60E

Front panel

a I/E STATION button and indicator
Releases the I/E station's lock. The lock can be released
when the indicator is lit green or orange. The indicator
starts blinking orange when the lock is released.
If the I/E station is not opened within ten seconds after
releasing the lock, the I/E station is automatically relocked.
If the I/E station remains open for longer than three
minutes, the indicator blinks red.
k
(network) port 1
Connect a network cable here to configure the unit or
check its status via the Web screen.
This appears as "Network1" in the configuration screen.
l
(network) port 2 (used for maintenance)
This appears as "Network2" in the configuration screen.
CAUTION
• For safety, do not connect the connector for peripheral
device wiring that might have excessive voltage to this
port. Follow the instructions for this port.
• When you connect the network cable of the unit to
peripheral device, use a shielded-type cable to prevent
malfunction due to radiation noise.
Note
You can select whether the I/E station of each unit is used
as an I/E slot for importing/exporting cartridges or as a
storage slot (importing/exporting of cartridges is disabled).
The I/E station lock cannot be released on units where the
I/E station is used as a storage slot.
43
Name and Function of Parts