Manually Adjusting The Audio Level Of The Mic In Connector; Recording Audio On Channels 3 And 4 - Sony CBK-55BK Handbuch

Correspondence between recording level
adjustments and audio level controls
On "Audio Input" of the Audio menu, you can select
which audio level control controls the audio recording
level of the input to each of the AUDIO IN CH-1/CH-2
connectors. The correspondences between the settings of
the menu items and the controls are as follows.
Rear1/WRR Level: Channel 1 recording level
Setting Knob
Side1 LEVEL (CH-1) knob
Front MIC LEVEL control
Front+Side1 LEVEL (CH-1) knob and MIC LEVEL
control (linked operation)
Rear2/WRR Level: Channel 2 recording level
Setting Knob
Side2 LEVEL (CH-2) knob
Front MIC LEVEL control
Front+Side2 LEVEL (CH-2) knob and MIC LEVEL
control (linked operation)
Note
When you have operation of the LEVEL (CH-1/CH-2)
knobs and MIC LEVEL control linked together, if the MIC
LEVEL control is set to 0, the audio signals on channels 1
and 2 cannot be recorded. Check the position of the MIC
LEVEL control before adjusting the LEVEL (CH-1/CH-2)
knobs.
Manually Adjusting the Audio Level
of the MIC IN Connector
1
Set the AUDIO IN switch(es) that is(are) used to
FRONT.
2
Set the AUDIO SELECT switch(es) for the desired
channel(s) selected in step1 to MANUAL.
3
Turn the MIC LEVEL control and make adjustment so
that the audio level meter displays up to –20 dB for a
normal input volume.
Correspondence between recording level
adjustments and audio level controls
On "Audio Input" of the Audio menu, you can select
which audio level control controls the audio recording
level of the front microphone input. The correspondences
between the settings of the menu items and the controls are
as follows.
46
Adjusting the Audio Level
MIC CH1 Level: Channel 1 recording level
Setting Knob
Side1 LEVEL (CH-1) knob
Front MIC LEVEL control
Front+Side1 LEVEL (CH-1) knob and MIC LEVEL
control (linked operation)
MIC CH2 Level: Channel 2 recording level
Setting Knob
Side2 LEVEL (CH-2) knob
Front MIC LEVEL control
Front+Side2 LEVEL (CH-2) knob and MIC LEVEL
control (linked operation)
Note
When you have operation of the MIC LEVEL control and
LEVEL (CH-1/CH-2) knobs linked together, if the
LEVEL (CH-1/CH-2) knobs are set to 0, the audio signals
on channels 1 and 2 cannot be recorded. Check the position
of the LEVEL (CH-1/CH-2) knobs before adjusting the
MIC LEVEL control.
Recording Audio on Channels 3 and
4
Selecting the recorded audio
You can select the audio recorded on audio channels 3 and
4 with the AUDIO IN CH-3/CH-4 switches.
CH-3 switch Channel 3 recording target
FRONT Front microphone audio
REAR Audio signal input to AUDIO IN CH-1
connector
WIRELESS Wireless microphone audio
CH-4 switch Channel 4 recording target
FRONT Front microphone audio
REAR Audio signal input to AUDIO IN CH-2
connector
WIRELESS Wireless microphone audio
Adjusting the audio recording levels
To adjust automatically
Set the AUDIO SELECT CH-3/4 switch to AUTO.