Using The Shoulder Strap; Adjusting The Shoulder Pad Position - Sony CBK-55BK Handbuch

Using the shoulder strap

To attach the shoulder strap
1
Fit one of the clips to a shoulder strap fitting.
Pull up the strap to lock the fitting.
Clip
2
Fit the other clip to the shoulder strap fitting on the
other side of the grip in the same way as in step1.
To remove the shoulder strap
Press here and pull in the direction
shown by the arrow to release.

Adjusting the shoulder pad position

You can change the position of the CBK-55BK and
shoulder pad as follows by sliding the front block.
1
37 mm (1 / inches)
2
Adjust the position of the front block and shoulder pad so
that the CBK-55BK can be operated easily while it is on
your shoulder.
To adjust the front block position
1
Release the lock of the front block by turning the front
block fixing lever on the bottom of the CBK-55BK.
2
Select the desired position by sliding the front block
backward or forward.
3
Fix the front block by turning the front block fixing
lever.
Front block
Front block fixing lever
5
33 mm (1 / inches)
16
7
70 mm (2 / inches)
8
43
Connection and Setup