Install The Camera - Axis 216FD series Anleitung

6 AXIS 216FD/216FD-V/216MFD/216MFD-V Pendant Kit

Install the camera

Refer to the AXIS 216FD Installation Guide to:
• connect the cables to the camera unit
• set the IP address
• focus the camera
• make the necessary image adjustments
Note:
The installation guide is available from the Axis web site at www.axis.com or from the AXIS
Network Video CD supplied with the camera.
Complete the installation
1. Stretch the rubber gasket round the edge of the dome casing. Align the Axis logotype
on the gasket with the printed logotype on the dome casing.
Rubber
gasket
AXIS 216FD
dome casing
2. Attach the dome casing and gasket to the pendant adapter.
3. Secure the dome casing using the supplied tamper-proof screws.
Note:
The gasket is not designed to carry the weight of the dome casing, be sure to hold the dome
casing until it is securely held in place by the tamper-proof screws.
Make sure that the gasket is
properly fitted with 'MOUNT
THIS SIDE UP' visible when
placed on the dome casing.