Axis 216FD series Anleitung Seite 5

AXIS 216FD/216FD-V/216MFD/216MFD-V Pendant Kit
Attach the pendant adapter
1. Attach the pendant adapter to the wall mount
bracket.
2. Lock the pendant adapter in the correct position on
the wall mount bracket, using the supplied M4x20
screw in the locking screw hole.
Recommended
locking screw position
Attach the camera unit
Note:
Before installing the camera, make a note of the serial number (S/N) which is located on the
product label on the base of the camera unit. The serial number is used in the installation.
Attach the camera unit to the pendant adapter using the supplied M4x16 screws.
Wall mount bracket
pendant
adapter
M4x20 screw
(supplied)
pendant adapter
Camera unit
M4x16 screws (supplied)
Locking screw hole
5