Install The Hardware - Axis P3905-RE Installationsanleitung

Install the Hardware

Important
Note
Note
Downloaded from www.Manualslib.com
M12 Connector
Data Power
TX+
DC+/DC-
RX+
DC-/DC+
TX-
DC+/DC-
RX+
DC-/DC+
AXIS P3905–RE must be mounted on a flat surface.
Camera angle adjustment for P3905–RE:
• Pan ±20°
• Tilt 0-15°
• Rotation ±175°
1. Use the supplied drill template and drill four holes for the
bottom cover screws and one hole for the network cable.
When using the drill template, make sure it conforms to the
desired angle of the camera installation.
2. Remove the top cover from the bottom cover, using the top
cover tool. See image 1.
manuals search engine
AXIS P3905–RE Network Camera
13