Install The Hardware - Axis P3346-VE Installationsanleitung

AXIS P33-VE Series Installation Guide

Install the Hardware

Please remove the rubber band for transport-safety from the camera unit before you mount
the camera.
Prepare the Network Cable
For network cable specifications, see Network Connector, on page 12.
If a cable other than the provided cable is used, you need to prepare a network cable with a gasket.
Gently force the cable through the gasket provided and attach a network connector. It may be
necessary to pierce a hole in the gasket with the resitorx screwdriver.
• Do not force the network connector into the gasket.
• Do not pierce the gasket with a knife or other sharp object.
Page 15