Before You Begin - Axis 216FD series Anleitung

AXIS 216FD/216FD-V/216MFD/216MFD-V Pendant Kit
AXIS 216FD/216FD-V/216MFD/216MFD-V Pendant Kit
This installation guide provides instructions for installing the Pendant Kit for the AXIS
216FD/216FD-V/216MFD/216MFD-V Fixed Dome Network Camera, in this document
referred to as AXIS 216FD. Please read through the entire guide before proceeding with the
installation.
For instructions on how to install the camera, please refer to the AXIS 216FD/216FD-V/
216MFD/216MFD-V Installation Guide, available from www.axis.com or the AXIS Network
Video CD.
AXIS 216FD
(not included)

Before you begin

Before you begin, make sure you have the following components:
• Pendant adapter kit
Package contents:
• (1) Cast aluminum pendant adapter
• (1) Pendant adapter gasket
• (1) 1.5 inch to 22mm adapter (not available in all pendant kits)
• (2) M4 x 16 Pozidriv screws
• (1) M4 x 20 Pozidriv screw
Additional components (not included):
• AXIS 216FD/216FD-V/216MFD/216MFD-V Network Camera
Package contents:
• (2) Pozidriv screws (not used for pendant adapter)
• (2) Tamper-proof screws
• (1) Screwdriver for tamper-proof screws
• Wall mount bracket
• Suitable screws/plugs for the wall mount bracket
• Pozidriv screwdriver (to attach the camera unit to the pendant adapter)
pendant
adapter
Wall mount
(not included)
3