Safety Instruction - Promac 930ELB Bedienungsanleitung

4. Slide the arbor into the spindle socket while slowly rotating the drill chuck. The socket has a
rectangular pocket where the tang (or flat portion of the arbor shown in Figure 10) fits into.
5. Seat the chuck with a rubber mallet, as shown in Figure 11.
Figure 10
Wood

2. Safety Instruction:

Tang-Side Up
Please read the safety instruction and operation
instruction carefully.
Please do wear a safety glass to avoid any material from
coming into the eyes whilst operation.
Please do wear ear mufflers or earplugs to avoid any
noise from hurting the listening whilst operation.
Please do wear proper work clothing whilst operation.
Loose clothing or tie are prohibited to avoid any
unnecessary incident.
If a operator has long hair, please do fix the hair or use
cap to avoid the hair from being drawn into it.
A processing workpiece shall be fixed firmly to avoid it
from being thrown out whilst operation.
Please keep both hands far from the rotating tool whilst
operation. Cotton gloves are prohibited to avoid from
being drawn into cutter.
Please pull out the power plug to avoid any electric shock
incident whilst product maintenance or repair.
Figure 11
8