Silvercrest HG02987 Bedienungsanleitung Seite 14

Because of its high input current of power bank, never
use a notebook or PC to charge the power bank. To
charge the power bank
with an output voltage of 5 V and an output current of
at least 2 A.
Connect the USB cable
of the power bank
Connect the other end of the USB cable
Type A) to a USB power supply (not included in the
scope of delivery).
The current battery status is displayed by LED indicator
for battery charging status
process.
1 LED light up = battery capacity approx. 25 %
2 LED light up = battery capacity approx. 50 %
3 LED light up = battery capacity approx. 75 %
4 LED light up = battery capacity approx. 100 %
Blinking LEDs means power bank is under charging
mode and number of LEDs light up refer to the approx.
battery capacity level of power bank.
WARNING! While the power bank is charging,
no external device can be connected to the power
bank for charging. After the power bank is fully charged,
remove the charging cable.
14 GB
only use power supplies
5
with the Micro USB Input
6
.
5
during the charging
4
1
(USB
6