Cleaning And Care - Silvercrest HG02987 Bedienungsanleitung

The device is not connected.
Check that it is connected. Lightly press the ON / OFF
button
3
The minimal charging current consumption of the
connected device might be too low.
Check with your connected device manual and see if
your connected device current consumption comply
with this product.
The power bank
button is pressed or when a device is con-
nected, even though the battery is charged.
The power consumption of the connected devices is
too high. Therefore, the internal overcurrent protection
device was activated.
Reduce the number of devices connected and press
the ON / OFF button

Cleaning and care

This product has no internal parts requiring maintenance.
Moisture entering the product may result in damage.
Ensure no moisture enters the product during cleaning
to prevent damaging the product beyond repair.
Do not use abrasive, solvent-based or aggressive
cleaners. These can damage the surface of the product.
Only clean the product with a slightly damp cloth and
mild washing-up liquid.
to begin the charging process.
5
3
does not react when the
.
GB 17