Navigation In Menus - wtw Multi 3500i Bedienungsanleitung

Multi 3500i
Messages (i)

Navigation in menus

The menus for settings and dialogs in courses contain further submenus. The
selection is made with the <L> <M> keys. The current selection is displayed
in reverse video.
Submenus
The name of the submenu is displayed at the upper edge of the frame.
Submenus are opened by confirming with <MENU/ENTER>.
Example:
System
General
Interface
Clock function
Reset
Settings
Settings are indicated by a colon. The current setting is displayed on the
right-hand side. The setting mode is opened with <MENU/ENTER>.
Subsequently, the setting can be changed with <L> <M> and
<MENU/ENTER>.
Example:
System
:
Language
:
Beep
:
Illumination
:
Contrast
Temperature unit
Switchoff time
Functions
Functions are designated by the name of the function. They are
immediately carried out by confirming with <MENU/ENTER>.
Example: Display the Calibration record function.
pH
Calibration type
Calibration interval
Unit for slope
Calibration record
:
i 2.00 4.01 7.00 10.01
Information or operating instructions are designated by the i symbol. They
cannot be selected.
Deutsch
Off
On
48 %
:
°C
:
30 min
:
TEC
:
7 d
:
mV/pH
Navigation in menus
21