Measuring Menus - wtw Multi 3500i Bedienungsanleitung

Multi 3500i
Measuring menu:
pH/ORP
Measuring menu:
ISE

Measuring menus

Menu item
Calibration /
Calibration interval
Calibration /
Calibration type
Calibration / Unit for
slope
Calibration /
Calibration record
Man. temperature
Reset
High resolution
Menu item
Calibration /
Calibration record
Man. temperature
Possible Description
setting
1 ... 999 d Calibration interval for the pH
electrode (in days).
The meter reminds you to
calibrate regularly by the flashing
sensor symbol.
TEC Buffer sets for pH calibration:
NIST/DIN TEC:
ConCal NIST/DIN: 1.679 / 4.006 / 6.865 /
ConCal:
mV/pH Unit of the slope.
% The % display refers to the
Nernst slope of -59.16 mV/pH
(100 x determined slope/Nernst
slope).
- Displays the calibration record of
the last calibration.
-20 ... +130 °C Entry of the manually determined
temperature. For measurements
without temperature sensor only.
- Resets all sensor settings to the
delivery condition.
On Resolution of the pH display:
Off On = 0.001
Off = 0.01
Possible Description
setting
- Displays the calibration record of
the last calibration.
-20 ... +130 °C Entry of the manually determined
temperature. For measurements
without temperature sensor only.
Measuring menus
2.00 / 4.01 / 7.00 / 10.01
9.180 / 12.454
pH 7.0 ± 0.5
and any other
buffer solution
23