Sharpening Wedge - Zipper ZI-HS25Z Bedienungsanleitung

REPLACING OIL
The hydraulic system is a closed system with
oil tank, oil pump and control valve. Low oil
levels can damage the oil pump. Check oil
level regularly with dipstick. The oil should
be completely changed once a year.
Following hydraulic oils or equivalent are
recommend for the log splitter's hydraulic
transmission system:
 SHELL Tellus 22
 MOBIL DTE 11
 ARAL Vitam GF 22
 BP Energol HLP-HM 22
Use a drain pan to aid in the removal of all
used oil and particles.
Hydraulische Holzspalter / Hydraulic log splitters ZI-HS13E/ZI-HS18EZ/ZI-HS25Z / ZI-HS25EZ
Remove oil drain plug to drain oil from the
hydraulic transmission system. Examine oil
for metal chips as a precaution to future
problems.
After oil has been completely drained from
the machine, reinstall drain plug.
Add the hydraulic transmission system with
recommended oil through filler plug opening.
Read dipstick to determine the
maximum and minimum of the oil
level. Low oil can damage the oil
pump. Overfilling can result in
excessive temperature in the hy-
draulic transmission system.
Apply sealant to filler plug and reinstall it.
Following an oil change, activate the log
splitter a few times without actually splitting.

SHARPENING WEDGE

This log splitter is equipped with reinforced
splitting wedge which blade is specially
treated. After long periods of operation, and
when required, sharpen the wedge using a
fine-toothed file removing any burrs or flat
spots on the edge.
Seite 42