5. Release both control handles to retract the
wedge ram. Remove the support stand.
6. Align the hole and locking pin of the guard
arm with the mount bracket. Secure the
guard arm with a M10X40 hex bolts, two
washers and a nut from the hardware bag.
Hydraulische Holzspalter / Hydraulic log splitters ZI-HS13E/ZI-HS18EZ/ZI-HS25Z / ZI-HS25EZ
7. Position the retaining hook onto the frame
and secure with two M10X35 hex bolts and
nuts.
8. Position the log lift inside the mounting
bracket and align with mounting bracket
holes. Secure with a M16X100 hex bolt and
nut. Hook the lift chain to wedge slide guide.
Seite 35