Zipper ZI-HS25Z Bedienungsanleitung Seite 37

4. Release both control handles to retract the
wedge ram. Remove the support stand.
5. Align the hole and locking pin of the guard
arm with the mount bracket. Secure the
guard arm with a M10X40 hex bolts, two
washers and a nut from the hardware bag.
Hydraulische Holzspalter / Hydraulic log splitters ZI-HS13E/ZI-HS18EZ/ZI-HS25Z / ZI-HS25EZ
Position the retaining hook onto the
frame and secure with three M10X35
hex bolts and nuts.
Position the log lift inside the mounting
bracket and align with mounting brack-
et holes. Secure with a M16X100 hex
bolt and nut. Hook the lift chain to
wedge slide guide.
Seite 37