Herunterladen Inhalt Inhalt Diese Seite drucken

Grundig STR 631 Servicehandbuch Seite 17

Vorschau ausblenden Andere Handbücher für STR 631:
Inhaltsverzeichnis

Werbung

You can change the designation of the channel
On-screen status display
index, the channels contained therein and the chan-
nel order to suit your taste. Up to five persons can
When you press the
button once, the STATUS
.
establish their own favourite channel index and give
menu containing the name of the selected channel
it a unique name (see "Selecting your favourite
index, the programme position number, the station
satellite channels").
name, the signal frequency and polarization, the
audio setting, the date and time, and the option for
calling up the main menu (with
.
), appears briefly
Selecting a channel index and a
on the picture screen.
programme position
STATUS
001
ARD
1
Using the red
11494 GHZ H
or the
7.02 7.20 MHZ PANDA
between the different channel indexes (normal,
SUN
15:35
radio and the current favourite indexes) (press the
respective button repeatedly).
In the receiver's display appears one after the other
the frequency and polarization of the current station
and the statio name.
Stored channel indexes
Your receiver is already pre-programmed for the
For every channel index, the receiver switches auto-
current channels of many satellites (see program-
matically to the last selected programme position
me list). In most cases, a correction is not required.
(Last Station Memory).
You can of course also receive channels which are
On the picture screen appears the selected channel
not preset in the receiver's memory (see chapter
index and the number and the name of the current
"Establishing a new Programme Position").
programme position.
How to edit the channel index according to your
preferences can be found in the chapter "Selecting
Using the ] | buttons or the numeric buttons,
2
your favourite satellite channels"
you can select another programme position for the
current channel index.
When switching the receiver on from standby, the
channel index and programme position which have
been selected before switching off are automatically
Stepping through the programme
recalled (Last Station Memory).
positions
You have the choice between 7 channel indices:
1
Using the ] | buttons on the remote control unit
or the
NORMAL:
step through the programme positions.
In this channel index, all preprogrammed channels
– In the receiver's display apppear one after the
are stored. If you wish to change programme
other the station name, the channel index name
position settings, this will always be done in the
and again the station name. If the "NORMAL"
NORMAL channel index.
index is selected, the programme position num-
FAVOURITE/RADIO:
ber appears behind the "NORMAL" display.
You can store your favourite satellite channels in
– The name of the channel index, the programme
five favourite indexes so that you can select the
position number and the station name are briefly
channels via the lowest programme positions with-
displayed on the picture screen.
out resorting the entire channel index. The favourite
indexes contain a channel choice made in the nor-
Direct programme position selection
mal index.
1
Select the programme positions 1 to 9 with the
The 5 favourite channel indexes are preprogram-
numeric buttons
med with the 20 "most attractive" channels of one
language group (Englisch, German, Spanish, Portu-
2
For the programme positions 10 to 300, enter the
guese and Italian) each and identified by the res-
two- or three-digit number by means of the nume-
pective language. The radio channel index contains
ric buttons.
20 radio channels. It is established in the same way
Each multi-digit entry must be completed within 2
as the other favourite indexes.
seconds
button on the remote control unit
¢
F
button on the receiver, you can switch
¢
F
ENGLISH FO1 ARD
¢ ¢
buttons on the receiver, you can
1
to
9
.
Adjusting the volume
Pressing the
button or the
button calls up the
1
x
c
"VOLUME" menu.
2
VOLUME
24
PRESS OK OR I
In the receiver's display appears, for example,
3
"VOLUME 24"
The adjusted volume is only effective with the
"TV/VCR", "AUDIO OUT" and the "TV" EURO-AV
socket. It has no effect on the EURO-AV sockets for
video recorder (AUX 2) and decoder (AUX 1).
2
You can adjust the volume level with the
x c
buttons between 0 and 32.
O
3
Save the set value by pressing the
button.
You can cancel the adjustment with the
.
button if
it is not yet saved.
O
If you do not press the
or
button, the menu
.
is exited after a few seconds. The set value remains
effective until you switch to standby. The old setting
then is recovered.
1
Sound mute
¢
1
Pressing the
button when you are in the SAT
mode mutes the sound. Press the button again to
recover the sound.
In the top right corner of the picture screen appears
"MUTE" as long as the sound is muted.
2
Channel index
(programme position list)
¢
1
Pressing the
button calls up the "CHANNEL
INDEX". This facilitates channel selection if you do
not know the programme position number for the
desired channel.
CHANNEL INDEX
NORMAL
1 ARD
2 ZDF
3 RTL
4 SAT 1
5 N-TV
0 FOR MORE
3
In the receiver's display appears "INDEX".
The current channel index is shown directly below
the headline.
The selected programme position appears in
the third line, the digit 3 is flashing. Use the
1
5
...
buttons or the ] | buttons to select
0
another position. The
button selects the next
page. In this case, the first line is marked (the digit
1 is flashing).
¢
Press the green
button to suppress the
"CHANNEL INDEX". If no button is pressed within a
few seconds, the channel index disappears automa-
tically.
Selecting your favourite
satellite channels
In the FAVOURITE and RADIO channel indexes, you
can put together your favourite satellite channels
using the programme positions in the NORMAL
channel index (which contains all preprogrammed
satellite channels). For this, 20 programme posi-
tions are available.
The programme list enclosed contains the factory
preset satellite channels.
Press the
button on the remote control unit
.
twice.
– The "MAIN MENU" appears.
MAIN MENU
1 TIMER
2 INSTALL
3 CHANNEL SETUP
4 LOCK CONTROL
PRESS 1-4 OR I
Press the
button and then the
button.
– The "FAVOURITES" menu appears with the 5 first
favourite channels.
CHANNEL SETUP
FAVOURITES
NAME
ENGLISH. 2
1 TUNING
SET
ON
2 FAVOURITES
F01 001
ARD
F02 002
ZDF
PRESS 1-2 OR I
F03 003
RTL
F04 004
SAT 1
F05 005
N-TV
PRESS OK OR I
The digit next to the name of the favourites list is
flashing. With the
x c
buttons you can switch
between the different favourites lists and radio lists.
With the | ] buttons, you can select the indivi-
dual signs/letters of the name of the current list. To
change them, use the
buttons.
x c

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Tp 720 satStr 632

Inhaltsverzeichnis