Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
Switching the device on or off
Press the ON/OFF button on the device to do this. The display illumination will
become brighter.
Press the ON/OFF button again, in order to switch the device on again from the
Standby mode. The display illumination will be dimmed.
Selecting the type of operation
You will select between the CD, RADIO or BUZZER (alarm tone) types of op-
eration with the FUNCTION switch.
Changing the volume
You can reduce or increase the volume in all types of operation with VOLUME.
Display
Press the DISPLAY button, to change between the operating display and the time
display.
Connecting an external audio device
You can connect the audio output of an external device (of an MP3 player, for
example) to the AUX IN on the right side of the device, in order to output the
sound through the CD Clock Radio.
The Radio or CD sound will switch off and AU will appear in the display, as
soon as the 3.5 mm phono connector of an audio cable has been connected to
the AUX IN socket. Now you will be able to set the volume for the external au-
dio device on the CD Clock Radio.
The alarm tone will switch on, instead of the radio or CD sound, at the waking
time set, if an alarm has been set and an external audio device has been con-
nected.
Aligning the wire aerial
The wire aerial for FM reception is located on the back of the device. Unwind it
completely, in order to guarantee the best possible reception.
10
Werbung
Kapitel
Inhaltsverzeichnis
