Warranty - Renishaw RP2 Anleitung

THE PROBE SYSTEM
Probe systems are easy to use and should
provide many years effective trouble free
operation.
Instructions given in this user guide will help
you to make the best use of your system.

WARRANTY

Equipment requiring attention under warranty
must be returned to your supplier.
No claims will be considered where Renishaw
equipment has been misused, or repairs or
adjustments have been attempted by
unauthorised persons.
CHANGES TO EQUIPMENT
Renishaw reserves the right to change
specifications without notice.
CNC MACHINE
CNC machine tools must always be operated
by competent persons in accordance with
manufacturers instructions.
CARE OF THE PROBE SYSTEM
Keep components reasonably clean.
INSTALLATION AND USERS GUIDE - ENGLISH
This product conforms to the following European standards:
BS EN 50081-2, BS EN 50082-2 and BS EN 61010-1. It complies
with the relevant essential health and safety and protection
requirements of the following EC Directives: 73/23/EEC as
amended (LOW VOLTAGE), 89/336/EEC as amended (EMC) and
93/68/EEC (CE Marking).
Important
All relevant safety information, including that incorporated in the
installation instructions, user instructions and maintenance
instructions must be observed.
FCC DECLARATION
FCC Section 15.19
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1. This device may not cause harmfull interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
FCC Section 15.105
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference, in which
case you will be required to correct the interference at your own
expense.
FCC Section 15.21
The user is cautioned that any changes or modifications not
expressly approved by Renishaw plc, or authorised representative
could void the user's authority to operate the equipment.
FCC Section 15.27
The user is also cautioned that any peripheral device installed with
this equipment such as a computer, must be connected with a high-
quality shielded cable to insure compliance with FCC limits.