Electrical Safety - FLORABEST FTS 1100 D4 Originalbetriebsanleitung

G B I E N I
equipment whilst it is running.
• Do not use the equipment in the
gases. Non-observance will re-
• Store the equipment in a dry
place and out of reach of chil-
dren.
the equipment and any pos-
sible person injury resulting
from this:
abrasive (grinding effect, e.g.
sandwater), corrosive, combus-
tible (e.g. motor fuels) or explo-
sive liquids, salt water, cleaning
agents and foodstuffs is not per-
liquid being transported must not
can lead to device damage and
create a risk for the user.
• Do not work with damaged or
incomplete equipment, or with
equipment that has been con-
verted without the approval of the
manufacturer. Before initial op-
eration, have a specialist check
that the required electrical pro-
tection measures are in place.
• Monitor the equipment during
operation (particularly in resi-
dential spaces, in order to detect
automatic switching off or dry
running of the pumps in time.
Regularly check the function
"Initial Operation"). Non-obser-
vance will invalidate all guaran-
tee and liability claims.
8
CY
• Please note that the pump is
not suitable for continuous op-
eration (e.g. for watercourses
in garden ponds). Check the
equipment regularly for correct
functioning.
• Note that the lubricants used in
the equipment may cause dam-
age or contamination if they
escape. Do not use the pump in
valuable plants.
by the cable or pressure line.
• Protect the equipment from frost
and from running dry.
• Use only original accessories
and do not carry out conversion
work on the equipment.
• Please read the notes in the op-
erating instructions on the topic
of "Cleaning/Maintenance/
Storage". Any measures above
and beyond these, particularly
opening the equipment, are to
be carried out by an electrician.
In the case of repairs, always
contact our service centre.

Electrical safety:

Caution: to avoid accidents
and injuries from electric
shocks:
• After erection, the mains plug
must be freely accessible when
the equipment is in operation.
• Before operating your new
pump, have a specialist check:
current circuit breaking must
be compliant with the safety