7.
Operation
Two complete rollers 1/8 with roller holders 2 are supplied.
They have different grains.
•
The coarser grain (green roller 8) is for use on thick calluses.
•
The finer grain (grey roller 1) also removes calluses, but also
smoothes them. This roller is especially suitable for smooth-
ing after having used the coarser roller 8.
WARNING!
Exert only light pressure. Do not treat one spot longer than
2-3 seconds. If too much pressure is exerted or if the treat-
ment duration is too long, this can lead to skin injuries.
7.1 Application
•
Make sure the skin is dry.
•
It is imperative that the skin is taut.
•
Stop the treatment immediately in case of pain.
•
Lay a blanket or towel down, on which the removed cal-
loused skin can fall.
1. Expose the parts from which the calluses are to be removed.
2. Keep the safety button 4 pressed while pushing the slide
switch 3 upwards (Position I). The roller 1/8 starts to rotate.
3. For a higher speed, push the slide switch 3 to the position II.
WARNING! Risk of injury!
Remember that at higher speeds, more callus is removed.
This can shorten the treatment time.
10
GB