10. Replacing the roller
WARNING!
Do not use the device if the surface of the roller is damaged.
NOTE:
• Replacement rollers can be ordered (see Chapter "Ordering
accessories" on page 16).
When must the roller be replaced?
•
When you can see signs of damage.
•
If you need an increasing amount of time for the same result.
•
Depending on the intensity of use, but generally after one
year.
Removal
•
Figure B: press both release buttons 6 simultaneously and
remove the roller holder 2 upwards.
Attachment
1. Figure B: place the roller holder 2 on the top of the device
in such a way, that the cog wheels of the roller 1/8 and the
device are above one another.
2. Press the roller holder 2 on to the device until it engages au-
dibly.
3. Check that it is secure.
13
GB