Information To Read Out Of Cards - Siemens AR6181-RX Einbau- Und Inbetriebnahmeanleitung

Setting up
5.2.4

Information to read out of cards

14
Siemens Building Technologies
Fire Safety & Security Products
According to the communication interface, the information to be read out of the
access cards has to be selected.
DIP 7 DIP 8 Information to be read
off off Serial number
Please note:
Please ensure that the number of positions analysed and the format of the
interface connected can be processed.
CerPass protocol (RS485)
Miro cards 13 digits card information
CerPass 13 digits card information, not identical with CerPass number
Hitag1/2 13 digits card information
UCI-protocol (RS485)
Miro cards 13 digits card information
CerPass 13 digits card information, not identical with CerPass number
Hitag1/2 13 digits card information (10 digits are relevant, right-justified,
leading zeros)
Clock / Data
Miro cards 13 digits card information
CerPass 13 digits card information, not identical with CerPass number
Hitag1/2 13 digits card information
DIP 7 DIP 8 Information to be read
off on CerPass access card
Please note:
Within this selection only CerPass access cards or CerPass coded cards will be
read. No reaction will be at the reader AR6181-RX if other cards are presented.
CerPass-, UCI-protocol (RS485)
Miro cards no reaction
CerPass 10 digits CerPass card information
Hitag1/2 no reaction
Clock / Data
Miro cards no reaction
CerPass 10 digits CerPass card information
Hitag1/2 no reaction
DIP 7 DIP 8 Information to be read
on off ID Number, BCD (4bit) coded data
Please note:
The ID Number is an information written by the user into the read/write area of the
Hitag1/2 cards (Write areas in Hitag1 and Hitag2 are defined for this type of
reader(s)).
Please ensure that the number of positions analysed and the format of the
interface connected can be processed.
Card type
Miro, Hitag1/Hitag2
Card type
CerPass
Card type
Hitag1/Hitag2
04.2005