Fitting The Folding Seat; Final Steps - Seca 684 Bedienungsanleitung Und Garantieerklärung

Fitting the folding seat

Final steps

80 •
You need the following fastenings for this assembly
step:
4 x M8 x 20
NOTE
• The folding seat is intended for patients who
cannot stand for the whole measuring pro-
cess.
• The folding seat must be assembled so that it
can be folded down in the direction of the
weighing platform.
1. Screw the folding seat to the left-hand side part.
2. Remove the cable ties on the legs of the folding
seat.
1. Ensure that all parts are correctly located.
2. Ensure that all screws are fully tightened.
4 x ø 8.4