General Information; Information Regarding Installation And Operating Instructions; Symbol Explanation; Copyright - oventrop Unibox T SH Einbau- Und Betriebsanleitung

1. General information

1.1. Information regarding installation
and operating instructions
These installation and operating instructions
help the specialist tradesman to install, put into
operation and service the "Unibox T SH".
The installation and operating instructions are
to be read in their entirety before fitting the
"Unibox T SH"

1.2. Symbol explanation

Safety guidelines are displayed by symbols.
These guidelines are to be observed to avoid
accidents, damage to property and malfunc-
tions.
DANGER
Imminent danger to life and limb
ATTENTION
Possible dangerous situation for product,
system and environment
NOTE
Useful information and notes.

1.3 Copyright

The installations instructions as well as the in-
cluded text, drawing, images and other illust-
rations are copyrighted.

1.4. Non-liability

We do not accept liability for damages and
malfunctions caused by nonobservance of
these instructions

2. Safety

2.1. Personnel requirements

The "Unibox T SH" has to be installed by an
authorised specialist tradesman with due
consideration of valid standards and rules.

2.2. Correct use

The "Unibox T SH" is used in hot water cen-
tral heating systems for individual room tem-
perature control in surface heating systems.
Installation and operating instructions
Any use of the product outside its intended
design will be considered as non compliant
and misuse. Operating safety is only guaran-
teed if the "Unibox T SH" is used correctly.

2.3. Safety notes

WARNING
Hot escaping fluids may injure eyes and
lead to bad scalding. Wear safety goggles
and inactivate the heating system before
work commences.
WARNING
Escaping fluids, the "Unibox T SH" and the
pipework can get very hot and lead to bad
scalding. Wear safety gloves and inactivate
the heating system before work commen-
ces.
ATTENTION
The maximum permissible operating pres-
sures and temperatures must not be
exceeded in order to prevent damage to
the "Unibox T SH".

3. Technical data

3.1. Dimensions

Installation depth: 57 mm
up to 26 57
8-31
Illustr. 3.1 Dimensions "Unibox T SH"
"Unibox T SH"
155
145
60 135
9