General Information; Validity Of The Operating Instructions; Extent Of Supply; Contact - oventrop Unibox E BV Betriebsanleitung

Unibox E BV
1.

General information

The original operating instructions were drafted
in German.
The operating instructions in other languages
have been translated from German.
1.1 Validity of the operating
instructions
These operating instructions are valid for the
individual room temperature control "Unibox
E BV".

1.2 Extent of supply

Please check your delivery for any damage
caused during transit and for completeness.
Items included in the delivery:
• "Unibox E BV" with protection cover
• Cover with thermostat
• Brackets
• Valve insulation
• Operating instructions
On delivery, the inside of the
"Unibox E BV" is protected by a
protection cover made of cardboard
(see Illust. 1 on page 23).
Illust. 1: Protection cover on "Unibox E BV"
102272480-V01.04.2020
General information

1.3 Contact

Contact address
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
59939 Olsberg
GERMANY
Technical services
Phone: +49 (0) 29 62 82-234

1.4 Declaration of conformity

Oventrop GmbH & Co. KG hereby declares that
this product complies with the basic require-
ments and other relevant provisions of the EC
Directives concerned.

1.5 Symbols used

Highlights important information
and further explanations.
Action required
f
• List
1. Fixed order. Steps 1 to X.
2.
Z Result of action
2.

Safety-related information

2.1 Correct use

Operating safety is only guaranteed if the prod-
uct is used correctly.
The "Unibox E BV" is used for individual room
temperature control in surface heating systems.
The "Unibox E BV" is used in low temperature
heating systems with a max. flow temperature
of 55 °C.
Any other use of the product will be considered
incorrect use.
Claims of any kind against the manufacturer
and/or its authorised representatives due to
damage caused by incorrect use will not be
accepted.
Observance of the operating instructions is part
23