Maintenance And Cleaning - IKA HBC 5 basic Betriebsanleitung

The device is maintenance-free. It is only subject to the
natural wear and tear of components and their statistical
failure rate.
Cleaning
For cleaning disconnect the mains
plug!
Use only cleaning agents which have been approved by
IKA to clean IKA devices.
® ®
Dirt
Dye
Construction material
Cosmetics
Foodstuff
Fuel
For materials which are not listed, please request
information from IKA ®
Wear protective gloves while cleaning the device.
Electrical devices may not be placed in the cleansing agent
for the purpose of cleaning.
Do not allow moisture to get into the device when cleaning.
Before using another than the recommended method for
cleaning or decontamination, the user must ascertain with
IKA that this method does not damage the device.
®

Maintenance and cleaning

Cleaning agent
Isopropyl alcohol
Water containing tenside/
isopropyl alcohol
Water containing tenside/
isopropyl alcohol
Water containing tenside
Water containing tenside
application support.
Spare parts order
When ordering spare parts, please give:
- machine type
- manufacturing number, see type plate
- item and designation of the spare part,
see www.ika.com, spare parts diagram and list
- Software version.
Repair
Please send the device for repair only after it has
been cleaned and is free from any materials which
may constitute a health hazard.
For repair, please request the "Decontamination Clear-
ance Certificate" from IKA
from the IKA website www.ika.com.
®
If you require servicing, return the device in its original
packaging. Storage packaging is not sufficient. Please also
use suitable transport packaging.
, or download printout of it
®
35