Epson PP 405 Benutzerhandbuch Seite 103

EPSON LQ 2550 and ESC/P2 Quick Reference
Appendix F
This appendix contains basic information on the EPSON LQ 2550 Printer
Emulation commands supported in three Printer types:
PRINTER TYPE 1
PRINTER TYPE 2
PRINTER TYPE 3
Some commands or parameters may be different for a specific PRINTER TYPE.
In those cases it will be indicated to which PRINTER TYPE a command or
parameter applies.
13853 Appendix F EPSON LQ 2550 and ESC/P2 Quick Reference
Characters used in control functions appear in monospaced type. Table 1 explains
some of the conventions used.
A pair of numbers separated by a slash ( / ) character indicates Column/Row
notation. This notation refers to the location of a character in a standard code table,
such as ASCII. (example: 1/B = 1B is the hex-code for Escape)
Spaces appear between characters in sequence for clarity; they are not part of the
format.
At the end of this chapter you will find a listing of the EPSON LQ 2550 Emulation
commands classified by Hex Code and a Hex - Decimal conversion table.
The following conventions are used in the command listings:
Table 1 Conventions
ESC Escape (1/B), introduces an escape sequence
P1 Numeric parameter, or number of units that specify a distance or quantity
pertaining to the escape sequence, control function or control string.
Accepted values are 0...9999, may be preceded by + or -.
If the parameter is in normal notation like "200" the programming in hex-code
is according to a ASCII table. ("200" = 32,30,30 in hex).
If the parameter must be programmed in hex-code the notation is with a
slash. (1/A = 1A in hex-code)
v1...vn A series of parameters pertaining to the escape sequence, control function
or control string.
SP Is standing for Space (hex 20)
F-1 F-2