Rs232 Interface Setup; Baud Rate - OHAUS PR Series Bedienungsanleitung

PR Series Balance
Changing Weighing Units
1. Press and hold the Print / Unit button until the Unit Menu is
displayed.
2. The default unit is gram (g). To change the unit, press No to
advance to the next unit.
3. Press Yes to set the unit displayed to the weighing unit.

5.5 RS232 Interface Setup

Enter this sub-menu to customize RS232 standard settings. Data
may be output to either a printer or a PC.

5.5.1 Baud Rate

Set the baud rate (bits per second).
1200 = 1200 bps
2400 = 2400 bps
4800 = 4800 bps
9600 = 9600 bps
19200 = 19200 bps
38400 = 38400 bps
EN-21
rS232
bAud