Additional Features - OHAUS PR Series Bedienungsanleitung

EN-12
Item Settings
Note: If the reference weight of last Percent Weighing operation
needs to be kept, press No when the message Clr.ref (Clear
reference) displays.
Printing Setup:
Changing printing setup. See Section 7 for more information.
4.4

Additional Features

Weigh Below
Note: Ensure the balance has been leveled and calibrated.
The PR balance is equipped with a weigh below hook for weighing below the balance (as shown below).
Before turning the balance over, remove the pan and draft shield elements (if present) to prevent damage. Do not
place the balance on the pan support cone or load cell pins.
To use this feature, remove power from the balance, then remove the protective cover for the weigh below
opening.
Power on the balance, and then use a string or wire to attach items to be weighed.
Weigh below
protective cover
PR Series Balance
Weigh below hook