The following screen is now displayed.
• Enter admin in the "User name" box.
• Enter hama in the "Password" box.
• Click OK to log onto the repeater.
The configuration program (start screen) of the repeater is shown once you have successfully
logged on.
All WLANs found by the repeater are shown in the table. Select your WLAN and then click Next
to continue.
If your WLAN has not been found, first click on Refresh. This causes the repeater to search again
for WLANs. If your network is still not shown, check whether your network meets the following
requirements.
WLAN 300 Mbps Repeater
9