Hama N300 Bedienungsanleitung Seite 10

• Your WLAN (the SSID) is visible. (Consult the manual for your WLAN router if necessary.)
• Your WLAN router and the WLAN function are switched on.
• Your WLAN router is transmitting in the 2.4 GHz range. (Consult the manual for your WLAN router
if necessary.)
• The current location is suitable for receiving WLAN signals from your WLAN router. (Move to a
location nearer to your WLAN router if necessary.)
If you have set your WLAN to "invisible" for security reasons, you must manually select your net-
work by first activating the Set up repeater manually option and then entering the name of your
"invisible" WLAN in the box labelled SSID. Then click Next to continue.
On the next screen, you will be asked for your WLAN key.
Enter the current WLAN key for your router in the box labelled Key and then click Next.
The WLAN key entered is now checked and compared with the key for your WLAN router. If the key
you entered is correct, the following success message is displayed (see next figure).
If your entry was incorrect, you are prompted to check and correct the key you entered. Enter the
corrected key to have it checked again by the system.
If the repeater still will not accept the key even after several corrections, we recommend setting a
new WLAN key on your router, one without special characters or German umlauts. (If necessary,
consult the manual for your WLAN router for how to set a new WLAN key.)
10
WLAN 300 Mbps Repeater