Wlan Timer Function - Hama N300 Bedienungsanleitung

7.2.7 WLAN timer function:

The WLAN timer function allows you to set when the repeater switches its WLAN module on
and off.
Note – Requirements:
► In order to use this function, you must have previously set the correct time zone
and set up a functioning time server. (See section 7.2.6 "Time zone".)
• Activate the WLAN timer by placing a check in the Enable WLAN timer checkbox.
• Select the desired day of the week and the time.
• Under Command, select the action you wish to take place on the selected day of the week and
at the selected time.
• After each timer rule created in this manner, click Add before continuing with the next rule.
The rules appear in a table once they have been added. If you wish to remove individual entries or
all entries, highlight the particular entries and click Remove or Remove all. Clicking Reset also
removes all the entries you have selected.
WLAN 300 Mbps Repeater
21