Advanced Option - Hama N300 Bedienungsanleitung

WLAN 300 Mbps Repeater
The WPS option is always activated by default. You can deactivate WPS by removing the check
from the Enable WPS checkbox. Once the repeater is restarted, linking is not possible using the
hardware button or the configuration program until this option is enabled again.
If you wish to start WPS from the configuration program, ensure that Enable WPS is checked
and the configuration mode is set to Registrar. Then click Start PBC. You now have 2 minutes
to enable WPS on your router in order for the linking procedure to take place. The PBC button
indicates the remaining time in which to enable WPS on your router.

7.2 Advanced option:

The Advanced option contains various functions that can be optionally enabled for the repeater,
such as access control, LAN settings or the WLAN timer.
14