Show active clients button:
This table provides information about the current state of the particular WLAN device. The follow-
ing information is relevant to the current situation:
MAC address:
Mode:
Tx speed:
You can click the Refresh button to refresh the screen. Clicking Close causes the registered WLAN
devices to no longer be displayed.
7.4 Tool option:
With this option, you can find system settings, update the firmware and reset the repeater.
24
Displays the MAC address of the registered WLAN device.
Displays the WLAN mode currently in use (11N, 11G or 11B).
Displays the current speed of the WLAN device that is registered on
the repeater.
WLAN 300 Mbps Repeater