7. Explanation of Special Options
Requirements:
The Hama WLAN repeater should already be fully configured and successfully connected to your
WLAN router.
The following options are not all necessary for operating the repeater; they should be considered
optional. Note that some of these options require advanced knowledge about network technology
and should therefore only be changed by experts.
In any case, be sure to save the current settings and create a backup so that you can return to
this original state in case of a configuration error, without having to redo all the settings. (Consult
section 6.3 of this manual, under the items -> Tool option -> Tool function.)
Note
► Note that you must restart the repeater at least once in order for altered settings to
be applied.
7.1 WPS option:
• Start the repeater's configuration program in Internet Explorer, as described in 6.2.
• On the left, select the WPS radio button.
Note – WPS
► The WPS option contains the settings for establishing a link (connection) between
the router and the repeater using WPS. You can start the linking procedure using
the hardware button (sec. 6.1) or here in the configuration program.
WLAN 300 Mbps Repeater
13